Configuring the RMON Ethernet statistics function
To configure the RMON Ethernet statistics function:
To do...
1.
Enter system view.
2.
Enter Ethernet interface view.
3.
Create an entry in the RMON
statistics table.
NOTE:
Only one statistics entry can be created on one interface.
•
Up to 100 statistics entries can be created for the device. When the number of statistics entries
•
exceeds 100, the creation of a new entry fails.
Configuring the RMON history statistics function
To configure the RMON history statistics function:
To do...
1.
Enter system view.
2.
Enter Ethernet interface view.
3.
Create an entry in the RMON
history control table.
NOTE:
entry-number
The
•
operation fails.
You can configure multiple history entries on one interface, but the values of the
•
arguments must be different, and the values of the
otherwise, the operation fails.
Up to 100 history entries can be created for the device.
•
When you create an entry in the history table, if the specified buckets
•
history table size supported by the device, the entry is created. However, the validated value of the
number
buckets
device.
Use the command...
system-view
interface interface-type interface-number
rmon statistics entry-number [ owner text ]
Use the command...
system-view
interface interface-type interface-number
rmon history entry-number buckets number
interval sampling-interval [ owner text ]
must be globally unique and cannot be used on another interface; otherwise, the
argument that corresponds to the entry is the history table size supported by the
sampling
interval
-
113
Remarks
—
—
Required
Remarks
—
—
Required
entry
number
-
arguments must be different too;
number
argument exceeds the