Outputting System Information To A Monitor Terminal - HP 5820X Switch Configuration Manual

Outputting system information to a monitor terminal

System information can also be output to a monitor terminal, which is a user terminal that has login
connections through the VTY user interface.
Outputting system information to a monitor terminal
To do...
1. Enter system view.
2. Enable information center.
3. Name the channel with a
specified channel number.
4. Configure the channel through
which system information can
be output to a monitor
terminal.
5. Configure the output rules of
the system information.
6. Configure the format of the
time stamp.
Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you must enable the associated
display function in order to display the output information on the monitor terminal.
To enable the display of system information on a monitor terminal:
To do...
1. Enable the monitoring of
system information on a
monitor terminal.
2. Enable the display of
debugging information on a
monitor terminal.
3. Enable the display of log
information on a monitor
terminal.
Use the command...
system-view
info-center enable
info-center channel channel-
number name channel-name
info-center monitor channel
{ channel-number | channel-
name }
info-center source { module-name
| default } channel { channel-
number | channel-name } [ debug
{ level severity | state state } * |
log { level severity | state state } *
| trap { level severity | state
state } * ] *
info-center timestamp { debugging
| log | trap } { boot | date |
none }
Use the command...
terminal monitor
terminal debugging
terminal logging
234
Remarks
—
Optional.
Enabled by default.
Optional.
See Table 9 for default channel
names.
Optional.
By default, system information is
output to the monitor terminal
through channel 1 (monitor).
Optional.
See "Default output rules of
system information."
Optional.
By default, the time stamp format
for log, trap and debugging
information is date.
Remarks
Required.
Enabled on the console and
disabled on the monitor terminal
by default.
Required.
Disabled by default.
Optional.
Enabled by default.