Configuring History Group Example - HP 5820X Switch Configuration Manual

Configuring history group example

Network requirements
As shown in
Server through Ethernet cables.
Gather statistics on received packets on GigabitEthernet 1/0/1 every one minute through RMON history
statistics table, and the administrator can view whether data burst happens on the interface in a short
time.
Figure 43 Network diagram for RMON
Configuration procedure
# Configure RMON to periodically gather statistics for interface GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] rmon history 1 buckets 8 interval 60 owner user1
After the configuration, the system periodically gathers statistics on packets received on GigabitEthernet
1/0/1: the statistical interval is 1 minute, and statistics of the last 8 times are saved in the history statistics
table. To view the statistics of the interface:
Execute the display command.
•
[Sysname-GigabitEthernet1/0/1] display rmon history
HistoryControlEntry 2 owned by null is VALID
Samples interface
Sampled values of record 1 :
dropevents
packets
multicast packets : 6
undersize packets : 0
fragments
collisions
Sampled values of record 2 :
dropevents
packets
multicast packets : 6
undersize packets : 0
fragments
collisions
Figure 43, Agent is connected to a configuration terminal through its console port and to
: GigabitEthernet1/0/1<ifIndex.3>
: 0
: 8
: 0
: 0
: 0
: 10
: 0
: 0
, octets
, broadcast packets
, CRC alignment errors : 0
, oversize packets
, jabbers
, utilization
, octets
, broadcast packets
, CRC alignment errors : 0
, oversize packets
, jabbers
, utilization
117
: 834
: 1
: 0
: 0
: 0
: 962
: 3
: 0
: 0
: 0