For system information destined to other destinations, the following rules apply:
If the time stamp starts with a %, the information is log information
•
If the time stamp starts with a #, the information is trap information
•
If the time stamp starts with a *, the information is debugging information
•
serial number
This field indicates the serial number of the device that generates the system information. It is only
displayed when the system information is sent to a log host in the format of UNICOM.
source
This field indicates the source of the information, such as the slot number of a board, IRF member ID,
IRF member ID and slot number, or the source IP address of the log sender. This field is optional and
is only displayed when the system information is sent to a log host in the format of HP.
content
This field provides the content of the system information.
Configuring information center
Information center configuration task list
Complete the following tasks to configure information center:
Task
Outputting system information to the console
Outputting system information to a monitor terminal
Outputting system information to a log host
Outputting system information to the trap buffer
Outputting system information to the log buffer
Outputting system information to the SNMP module
Outputting system information to the web interface
Saving system information to a log file
Saving security logs into the security log file
Configuring synchronous information output
Disabling a port from generating link up/down logging information
232
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional