Configuring Netstream Aggregation Data Export - HP 5820X Switch Configuration Manual

To do...
6. Configure the source
interface for NetStream
traditional data export.
7. Limit the data export rate.

Configuring NetStream aggregation data export

NetStream aggregation can be implemented by software or hardware. The term of NetStream
aggregation refers to the implementation by software, unless otherwise noted.
The NetStream hardware aggregation directly merges the statistics of data flows at the hardware layer
according to the aggregation criteria of the specific aggregation mode, and stores the NetStream
hardware aggregation data in the cache. When the timer for the hardware aggregation entry expires,
the data is exported. This greatly reduces the resource consumption by NetStream aggregation.
Without hardware aggregation configured, the NetStream data aggregation is implemented by software.
To configure NetStream aggregation data export:
To do...
1. Enter system view.
2. Enter Layer 2 Ethernet
interface view or Layer 3
Ethernet interface view.
3. Enable NetStream.
4. Exit to system view.
5. Configure the NetStream
hardware aggregation.
6. Set a NetStream aggregation
mode and enter its view.
Use the command...
ip netstream export source
interface interface-type interface-
number
ip netstream export rate rate
Use the command...
system-view
interface interface-type
interface-number
ip netstream { inbound |
outbound }
quit
ip netstream aggregation
advanced
ip netstream aggregation
{ destination-prefix | prefix |
prefix-port | protocol-port |
source-prefix | tos-
destination-prefix | tos-prefix
| tos-protocol-port | tos-
source-prefix }
203
Remarks
Optional.
•
By default, the interface where the
NetStream data is sent out (the
interface connects to the
NetStream server) is used as the
source interface.
•
HP recommends you connect the
network management interface to
the NetStream server and
configure it as the source interface.
Optional.
No limit by default.
Remarks
—
—
Required.
Disabled by default.
—
Optional.
Disabled by default.
Required.