HP 5820X Switch Configuration Manual page 108

To configure SNMPv3:
To do...
1. Enter system view.
2. Enable the SNMP agent.
3. Configure SNMP agent system
information.
4. Configure a local engine ID
for an SNMP entity.
5. Create or update the MIB
view content for an SNMP
agent.
6. Configure an SNMP agent
group.
7. Convert the user-defined plain
text password to a cipher text
password.
8. Add a new user to an SNMP
agent group.
9. Configure the maximum size
of an SNMP packet that can
be received or sent by an
SNMP agent.
Use the command...
system-view
snmp-agent
snmp-agent sys-info { contact sys-
contact | location sys-location |
version { all | { v1 | v2c |
v3 }* } }
snmp-agent local-engineid
engineid
snmp-agent mib-view { excluded
| included } view-name oid-tree
[ mask mask-value ]
snmp-agent group v3 group-name
[ authentication | privacy ] [ read-
view read-view ] [ write-view
write-view ] [ notify-view notify-
view ] [ acl acl-number ]
snmp-agent calculate-password
plain-password mode { 3desmd5
| 3dessha | md5 | sha } { local-
engineid | specified-engineid
engineid }
snmp-agent usm-user v3 user-
name group-name [ [ cipher ]
authentication-mode { md5 |
sha } auth-password [ privacy-
mode { 3des | aes128 | des56 }
priv-password ] ] [ acl acl-
number ]
snmp-agent packet max-size byte-
count
98
Remarks
—
Optional.
Disabled by default.
You can enable the SNMP agent
through this command or any
command that begins with snmp-
agent.
Optional.
The defaults are as follows:
Hewlett-Packard Development
Company, L.P., and SNMPv1
SNMPv2c SNMPv3 for the
version.
Optional.
Company ID and device ID by
default.
Optional.
By default, the MIB view name is
ViewDefault and OID is 1.
Required.
Optional.
Required.
If the cipher keyword is specified,
the arguments auth-password and
priv-password are considered as
cipher text passwords.
Optional.
1,500 bytes by default.