Navigation Panel - ZyXEL Communications NBG6716 User Manual

Table 20 Status Screen: Router Mode (continued)
LABEL
Packet Statistics
WLAN 2.4G Station
Status
WLAN 5G Station Status
System Status
Item
Data
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
Interface Status
Interface
Status
Rate

6.2.1 Navigation Panel

Use the sub-menus on the navigation panel to configure NBG6716 features.
Chapter 6 Router Mode
DESCRIPTION
Click Details... to go to the Monitor > Packet Statistics screen
Use this screen to view port status and packet specific statistics.
Click Details... to go to the Monitor > WLAN 2.4G Station Status screen
page 72). Use this screen to view the wireless stations that are currently associated to the
NBG6716's 2.4GHz wireless LAN.
Click Details... to go to the Monitor > WLAN 5G Station Status screen
page 72). Use this screen to view the wireless stations that are currently associated to the
NBG6716's 5GHz wireless LAN.
This column shows the type of data the NBG6716 is recording.
This column shows the actual data recorded by the NBG6716.
This is the total time the NBG6716 has been on.
This field displays your NBG6716's present date and time.
This displays what percentage of the NBG6716's processing ability is currently used. When
this percentage is close to 100%, the NBG6716 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.)
This shows what percentage of the heap memory the NBG6716 is using.
This displays the NBG6716 port types. The port types are: WAN, LAN and WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or
Down when the 2.4G/5G WLAN is disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using Ethernet
encapsulation. This field displays N/A when the line is disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled.
NBG6716 User's Guide
45
(Section 9.5 on page 71).
(Section 9.6 on
(Section 9.6 on