Wps Screen - ZyXEL Communications NBG6716 User Manual

Click Network > Wireless LAN 2.4G/5G > QoS. The following screen appears.
Figure 66 Network > Wireless LAN 2.4G/5G > QoS
The following table describes the labels in this screen.
Table 40 Network > Wireless LAN 2.4G/5G > QoS
LABEL
WMM QoS
Apply
Cancel

11.8 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN 2.4G/5G > WPS.
Note: With WPS, wireless clients can only connect to the wireless network using the first
SSID on the NBG6716.
Chapter 11 Wireless LAN
DESCRIPTION
Select Enable to have the NBG6716 automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes
them run more smoothly.
This field is not configurable and the NBG6716 automatically enables WMM QoS if you
select 802.11n, 802.11an, 802.11gn, 802.11bgn or 802.11ac in the Wireless
LAN 24G/5G > General screen.
Click Apply to save your changes to the NBG6716.
Click Cancel to reload the previous configuration for this screen.
NBG6716 User's Guide
101