Wireless Security; No Security - ZyXEL Communications NBG6716 User Manual

Table 31 Network > Wireless LAN 2.4G/5G > General (continued)
LABEL
Security Mode
Apply
Cancel
See the rest of this chapter for information on the other labels in this screen.

11.3 Wireless Security

The screen varies depending on what you select in the Security Mode field.

11.3.1 No Security

Select No Security to allow wireless clients to communicate with the access points without any
data encryption.
Note: If you do not enable any wireless security on your NBG6716, your network is
accessible to any wireless networking device that is within range.
Figure 57 Network > Wireless LAN 2.4G/5G > General: No Security
Chapter 11 Wireless LAN
DESCRIPTION
Select Static WEP, WPA-PSK, WPA, WPA2-PSK or WPA2 to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as this device. After you select to use a security,
additional options appears in this screen. See
information on different security modes. Or you can select No Security to allow any
client to associate this network without authentication.
Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are
available in this field.
Click Apply to save your changes back to the NBG6716.
Click Cancel to reload the previous configuration for this screen.
NBG6716 User's Guide
89
Section 11.3 on page 89 for detailed