Password Screen - ZyXEL Communications NBG6716 User Manual

The following table describes the labels in this screen.
Table 68 Maintenance > General
LABEL
System Name
Domain Name
Administrator
Inactivity Timer
Apply
Cancel

23.4 Password Screen

It is strongly recommended that you change your NBG6716's password.
If you forget your NBG6716's password (or IP address), you will need to reset the device. See
Section 23.8 on page 170
Click Maintenance > Password. The screen appears as shown.
Figure 119 Maintenance > Password
The following table describes the labels in this screen.
Table 69 Maintenance > Password
LABEL
Password Setup
Old Password
New Password
Retype to Confirm
Apply
Cancel
Chapter 23 Maintenance
DESCRIPTION
System Name is a unique name to identify the NBG6716 in an Ethernet network.
Enter the domain name you want to give to the NBG6716.
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Click Apply to save your changes back to the NBG6716.
Click Cancel to begin configuring this screen afresh.
for details.
DESCRIPTION
Change your NBG6716's password (recommended) using the fields as shown.
Type the default password or the existing password you use to access the system in
this field.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Type the new password again in this field.
Click Apply to save your changes back to the NBG6716.
Click Cancel to begin configuring this screen afresh.
NBG6716 User's Guide
165