What You Can Do; What You Need To Know - ZyXEL Communications NBG6716 User Manual

Figure 20 Easy Mode: Status Screen
Go to
Network
Map
Screen

5.2 What You Can Do

You can do the following in this mode:
• Use the Navigation Panel to opt out of the Easy Mode
• Use the Network Map screen to check whether your NBG6716 is connected to the Internet or
any networking devices and view the transmission speed between them
33).
• Use the Control Panel to configure and enable NBG6716 features, including wireless scheduling,
wireless security, content filtering, firewall and so on
• Use the Status Screen to view read-only information about the NBG6716, including the WAN IP,
MAC address of the NBG6716, the firmware version and wireless settings
40).

5.3 What You Need to Know

Between the different device modes, the Control Panel
depending on which features are applicable to the mode:
• Router Mode: All Control Panel features are available.
• Access Point Mode: Only Power Saving and Wireless Security are available.
Chapter 5 Easy Mode
Navigation Panel
Status Screen
Control Panel
NBG6716 User's Guide
32
(Section 5.4 on page
(Section 5.5 on page
(Section 5.6 on page 34).
(Section 5.7 on page
(Section 5.6 on page 34) changes
33).