Multiple Workstation Configuration - Furuno FEA-2807 Operator's Manual
Electronic chart display and information system (ecdis)
Hide thumbs
Also See for FEA-2807:
- Specifications (4 pages) ,
- Operator's manual (704 pages) ,
- Installation manual (168 pages)
Table of Contents
Advertisement
1.2.2
Multiple workstation configuration
In the multiple workstation configuration, there are two workstations connected together by a Local Area Network
(LAN). In this configuration, one workstation is used as the "sensor source" for navigation sensors and the other
workstation is used as the sensor source workstation that communicates with sensors, receiving and transmitting
data from/to workstation via the LAN. In the multiple workstation configuration (two fully redundant navigation
workstations), where navigation sensors are connected to two workstations, the sensor source may be changed and
still receive and transmit information from/to the system and to/from navigation sensors.
MONITOR UNIT
MU-201CE (FEA-2107)
MU-190 (FEA-2107)
100-230
MU-231CE (FEA-2807)
VAC
MU-231 (FEA-2807)
CALCOMP
DRAWING-
BOARD III
DIGITIZER
ECDIS PROCESSOR
EC1000C
RADAR OVERLAY PCB
100-230 VAC
FAR-2xx7
series radar
CONTROL UNIT
RCU-018
or
CONTROL UNIT
RCU-015
REMOTE CONTROL
UNIT
RCU-016
MONITOR UNIT
MU-201CE (FEA-2107)
MU-190 (FEA-2107)
MU-231CE (FEA-2807)
100-230 VAC
MU-231 (FEA-2807)
ECDIS PROCESSOR
100-230
EC1000C
VAC
RADAR OVERLAY PCB
FAR-2xx7
series radar
CONTROL UNIT
RCU-018
or
CONTROL UNIT
RCU-015
REMOTE CONTROL
UNIT
RCU-016
Category of Units: All units protected from weather
*Conning use
MONITOR UNIT*
MU-201CE (FEA-2107)
MU-190 (FEA-2107)
100-230 VAC
MU-231CE (FEA-2807)
MU-231 (FEA-2807)
HUB-
100
100-230 VAC
HUB-
100
100-230 VAC
Multiple workstation with connection to navigation sensors
TT RADARS
NAVTEX
TRACKPILOT
LAN-ADAPTER
LOG/DUAL AXIS LOG
EC-1010
AIS
GYRO COMPASS
24 VDC
NAVTEX
ENGINE CONTROL
ECHOSOUNDER
LAN-ADAPTER
WIND SENSOR
EC-1010
WATER TEMP. METER
AMWSS
24 VDC
GYRO COMPASS
(SYNCHRO, STEPPER)
B-ADAPTER
LOG (200P/NM)
EC-1020
ANALOG INPUT (8 CHANNELS)
ANALOG OUTPUT
24 VDC
RADAR 1 (VIDEO, HL, AZ)
Selector
RADAR 2 (VIDEO, HL, AZ)
PRINTER
(USB)
TT RADARS
NAVTEX
LAN-ADAPTER
TRACKPILOT
LOG/DUAL AXIS LOG
EC-1010
AIS
GYROCOMPASS
24 VDC
NAVTEX
ENGINE CONTROL
ECHOSOUNDER
LAN-ADAPTER
WIND SENSOR
EC-1010
WATER TEMP. METER
AMWSS
24 VDC
GYROCOMPASS
(SYNCHRO, STEPPER)
B-ADAPTER
LOG (200P/NM)
EC-1020
ANALOG INPUT (8 CHANNELS)
ANALOG OUTPUT
24 VDC
RADAR 1 (VIDEO, HL, AZ)
Selector
RADAR 2 (VIDEO, HL, AZ)
PRINTER
(USB)
1. Introduction
OPTION
EXTERNAL
DEVICE
1-3
Advertisement
Table of Contents
Troubleshooting
