Modes Of User Charts - Furuno FEA-2807 Operator's Manual

15. User Chart Control
15.1.2

Modes of user charts

A user chart can be selected for the monitoring mode, which means that it is displayed on the connected radar
display and it can be used in chart alert calculation. Another user chart mode modifies the user chart planning mode.
In the planning mode, a user chart is only displayed on the ECDIS display; it is not displayed on the connected radar
nor is it used in chart alert calculation. It is possible to have both the monitored and planned user chart at the same
time if separate plan and monitor units are used. Eventually the monitored and planned user charts copy the
operation of monitored and planned routes. Below is an example of how to know which user chart is used for
monitoring mode and which one is used in planning mode.
The UserChart field in the information area, where the user chart can be selected for the monitoring or planning
mode.
15-2
(WT)
User Chart
Monitor
DISP
Plan
DISP
X