How To Import Waypoints From Other Routes - Furuno FEA-2807 Operator's Manual

13.5.7

How to import waypoints from other routes

You can import waypoints from other routes to use them in the current route. To import waypoints do the following:
1. Click Route in the information area then click the Plan button to open the Plan Route dialog box. Click the
WPT tab to open the WPT page. Check Enable changes.
2. Click the Import button, and the following dialog box appears.
WPT IMPORT
WPT
First WPT to copy
Number of WPTs
3. In the Copy from window, put the cursor in the Route box, spin the scrollwheel to select the route from which
to copy waypoints then push the scrollwheel.
4. Enter first waypoint to copy in "First WPT to copy". Spin the scrollwheel to select WPT number then push the
scrollwheel.
5. Enter number of waypoints to copy in "Number of WPTs". Spin the scrollwheel to select desired number then
push the scrollwheel.
6. Enter where to import waypoints. To enter them after a WPT in a route, enter waypoint number in the "Copy
after WPT" box. If you want to enter them before a WPT in the route, enter waypoint number in the "Copy
before WPT" box. Spin the scrollwheel to select desired number then push the scrollwheel.
7. Select copying order, Direct or Reverse. "Direct" copies the waypoints in their original order; "Reverse" copies
them in reverse order. Spin the scrollwheel to select desired option then push the scrollwheel.
8. Click the Copy button.
9. When finished, click X at top right corner of the dialog box to close the dialog box.
WPT
Copy after WPT
Copy before WPT
13. Route Planning
13-13