Sidebar On User Interface - Furuno FEA-2807 Operator's Manual

Electronic chart display and information system (ecdis)

Hide thumbs Also See for FEA-2807:

Table of Contents

3. ECDIS Display

Sidebar on user interface

You may select what kind of information to display in the sidebar (right side) of the ECDIS. The options shown

below are available and the content of the sidebar windows change with the devices and sensors connected to the

system. The route display or autopilot display is always displayed. You can display one of them together with the

conning display, docking display or chart legend. When two sidebars are active, the width of the information area is

doubled, as shown below. The autopilot display is available when "Track Control" is set to "Yes".

Route display

Autopilot display

Conning display

Docking display

Chart legend

Sidebar, with autopilot and conning display windows

Fea-2107-bb Fea-2107