System Configuration - Furuno GP-1650F Installation Manual

Color gps/plotter/sounder
Hide thumbs Also See for GP-1650F:
Table of Contents

Advertisement

ANTENNA UNIT
Receives signal from
GPS satellite and beacon
reference station
(GP-1650DF only).
DISPLAY UNIT
Ship's position is
calculated in longitude
and latitude from signal
received from the an-
tenna unit and displayed
on the screen.
The GP-1650F/1650DF mainly consists of a display unit, a GPS an-
tenna and a dual frequency transducer. A DGPS beacon receiver is
provided inside the display unit for GP-1650DF type. The chart card
drive in the display unit loads electronic charts. External equipment
which can be connected include water temperature and speed sen-
sors, autopilot, and DGPS beacon receiver.
WHIP ANTENNA
1.2 m
GPA-017
(for GP-1650F)
Temp. sensor
(option)
Transducer
(option)

System Configuration

GPA-018
(for GP-1650DF)
DGPS beacon receiver
GP-1650F only
GPA-019
(for GP-1650DF)
Ship's mains
10.8—31.2 VDC
External equipment
(Autopilot, etc.)
i

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gp-1650df

Table of Contents