Control Of Predefined Imo Chart Display Settings - Furuno FEA-2807 Operator's Manual

Electronic chart display and information system (ecdis)

Hide thumbs Also See for FEA-2807:

Table of Contents

8. Vector Chart Material

Control of predefined IMO Chart Display Settings

There are three sets of predefined Chart Display Settings that can be used to display Charts with certain chart

features. The predefined Chart Display Settings are as follows:

IMO-Standard

IMO-All Other

You can find display setting in use on upper status bar. See section 3.1 "ECDIS Overview".

To select desired IMO Chart Display Settings, do the following:

Chart Display

Graphical indication

Alarm/Warning

Safety contour

1. Open the Chart Display window, put the cursor on the black triangle on the Chart

Display window then press the left mouse button.

2. Select Set IMO Base, Set IMO Standard or Set IMO All Other from the menu.

Fea-2107-bb Fea-2107