Table of Contents
Advertisement
SYSTEM CONFIGURATION
CONTROL UNIT
CONTACT SIGNAL IN
CONTACT SIGNAL OUT
PC (for serviceman)
HEADING SENSOR
PG-700
EXTERNAL BUZZER
EVENT SWITCH
NAV EQUIPMENT
(NMEA 0183)
CANBUS EQUIPMENT
(NMEA 2000)
EVC System*
: STANDARD
: OPTION
: USER SUPPLY
*
1
: Any combination of control units is available. For FAP-7021, connect at the end of series.
*
2
: Not required for Fantum Feedback
*
3
: Not required for the EVC system equipped vessel.
*
4
: Connect one Dial-type Remote Controller FAP-5551 to one Distributor FAP-6800.
5
*
: EVC systems compatible with the NAVpilot are as follows:
EVC System
VOLVO PENTA IPS
YAMAHA Helm Master
YANMAR VC10
SEASTAR SOLUTIONS
OPTIMUS
ii
CONTROL UNIT
FAP-7001
FAP-7011
Select one
PROCESSOR UNIT
FAP-7002
5
12-24 VDC
TM
.
Requires VOLVO interface kit FAP-6300 (available as an optional extra).
Requires YAMAHA HM interface kit FAP-6310 (available as an optional extra).
• Connect through the NMEA data converter IF-NMEA2K2 (ver.01.07 or later).
• Requires connector assembly AT06-2S-EC01-VCT-030 (available as an optional extra).
• Connect through the NMEA data converter IF-NMEA2K2 (ver.01.16 or later).
• The software version of the connected Main PCM (Pump Control Module) must be "Rev. T" or
later.
CONTROL UNIT
FAP-7011C
JUNCTION BOX
FAP-7822
CONTROL UNIT QTY
FAP-7001/7011: MAX. 6*
FAP-7021: MAX. 2
SOLENOID
VALVE
HYDRAULIC LINEAR DRIVE
RUDDER REFERENCE UNIT
FAP-6112*
2
REMOTE CONTROLLER
DISTRIBUTOR FAP-6800
REMOTE CONTROLLER:
DIAL TYPE: FAP-5551*
LEVER TYPE: FAP-6221, FAP-6222
DODGE TYPE: FAP-6231, FAP-6232
Remarks
1
SHIP'S
STEERING
SYSTEM*
3
4
, FAP-5552
Advertisement
Table of Contents
