Distance And Trip Counters; How To Reset Distance And Trip Counters - Furuno FEA-2807 Operator's Manual

24. Recording Functions

24.12 Distance and Trip Counters

Distance and trip counters have separate
fields for both through water and over
ground distances. This information is
available on the Count page of the Sensors
dialog box, shown right. To reset the
distance trip counter, click the Reset trip
counter on the Count page. The trip
counter can also be reset from the Record
menu as shown below.

24.12.1 How to reset distance and trip counters

It is useful to reset the distance counter when you are starting a new voyage.
24-14
To reset the distance and trip counters, do the following:
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions area
then push the left mouse button. Select Record from the menu then push the
scrollwheel.
2. Select Reset from the menu then push the scrollwheel.
3. Select Distance Counter from the submenu then push the scrollwheel.
4. You are asked if you are sure to reset the distance and trip counters; click the OK
button to reset those counter.
To reset only the trip counter, do the following:
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions area
then push the left mouse button. Select Record from the menu then push the
scrollwheel.
2. Select Reset from the menu then push the scrollwheel.
3. Select Trip Counter from the submenu then push the scrollwheel.
4. You are asked if you are sure to reset the trip counter; click the OK button to reset
the trip counter.