Panasonic KW-WP1050E Operating Instructions Manual page 56

Getting Started
Setting
[Connection Mode]
[IP Address]
[Subnet Mask]
[Default Gateway]
56
Description
L Select [AP-DHCP] for Connection Mode if the DHCP server
is operating in the router or modem with a built-in router you
are using. Select [AP-Static] if you want to assign Static IP
address.
For [AP-Static]:
L Enter the IP address and subnet mask corresponding to
your local network.
L Set 4 numbers (0 – 255) separated by periods such as
"192.168.102.253".
Note:
L There are some restrictions on IP address entry. For
example, "0.0.0.0" and "255.255.255.255" are not available.
For [AP-Static]:
L Enter the default gateway address corresponding to your
local network by entering the IP address of your existing
router or modem with a built-in router, for example.
L Set 4 numbers (0 – 255) separated by periods such as
"192.168.102.253".
Note:
L There are some restrictions on IP address entry. For
example, "0.0.0.0" and "255.255.255.255" are not available.
Helpline Tel. No.: U.K. 0844 844 3898