Table of Contents
Advertisement
5
Select [Obtain an IP address automatically].
6
Click [OK].
7
Click [OK], then close the Network Connection window.
Setting the static IP address on your computer
When you log in the base unit with defective firmware, the firmware update screen will be
displayed. In this case, a static IP address needs to be set on your computer.
1
Click [Start], then click [Control Panel].
2
Click [Network and Internet Connections], then click [Network Connections].
3
Right-click the Local Area Connection icon connected to the base unit, then select
[Properties].
Helpline Tel. No.: U.K. 0844 844 3898
Base Unit Settings
207
Advertisement
Table of Contents
Troubleshooting
