Table of Contents
Advertisement
Base Unit Settings
Modifying the wireless information
1
Click [Network Connection] on the Top Menu.
2
Click [Modify] under the Wireless Information heading.
3
Configure the wireless connection basic settings, then click [Next>].
Setting
[Mode]
[Channel]
[Network Name
(SSID)]
[SSID Broadcast]
4
Configure the wireless connection security settings, then click [Save].
Setting
[Security Mode]
WEP settings
[Network Key]
[Key Index]
142
Description
L Select your wireless network mode from the pull-down menu.
L If you have both 802.11b and 802.11g wireless devices in
your network, select [802.11b/g].
L If you have only 802.11b wireless devices, select [802.11b].
L Select [Auto] or the desired channel from [1] to [11].
L Enter your wireless network name (SSID) (1 – 32
alphanumeric characters) in this data field.
L Enable or disable the broadcasting of your SSID.
L If you select [Disable], only wireless devices that know the
SSID of the base unit can connect to the base unit.
L If you select [Enable], any wireless device can detect the
SSID of the base unit.
Description
L Select the desired security mode.
L No Encryption (Open), WEP, WPA-PSK and WPA2-PSK are
available for the wireless devices, including the handset.
Select the desired security mode for your wireless devices
connected to the base unit. Default is set to WEP.
For WEP 64bit:
L Enter the network key containing 5 alphanumeric characters
or 10 hexadecimal characters.
For WEP 128bit:
L Enter the network key containing 13 alphanumeric
characters or 26 hexadecimal characters.
L Press [View] to display the network key.
L Select [Key 1], [Key 2], [Key 3] or [Key 4] to be used if you
use WEP. The default is set to [Key 1].
Helpline Tel. No.: U.K. 0844 844 3898
Advertisement
Table of Contents
Troubleshooting
