Panasonic KW-WP1050E Operating Instructions Manual page 160

Base Unit Settings
4
Configure the settings under the Port Forwarding Setting heading. Click [Add] to add
a new entry.
Setting
[No.]
[Status/Port
Forwarding]
[Forwarding IP
Address]
[Protocol]
[Port]
5
Click [Restart].
L The base unit automatically restarts and the Top Menu is displayed.
Note:
L To edit the setting:
1
Click the desired entry number in step 3.
2
Edit the items in the Port Forwarding Setting page.
3
Click [Save].
4
Click [Restart].
L To delete the setting:
1
Click the desired entry number in step 3.
2
Click [Delete] in the Port Forwarding Setting page.
3
Click [OK] in the confirmation dialogue box.
4
Click [Restart].
160
Description
L Select the desired entry number for the port forwarding
setting.
L Entry number represents the priority. Entry number 1 has the
highest priority.
L Select whether to enable or disable the port forwarding
feature.
L Enter the IP address of the computer that is hosting the
service.
L The device registered as the forwarding IP address can be
accessed from the Internet through the registered protocol
and port.
L Select the desired protocol used to access your hosting
service from TCP/UDP/TCP&UDP/ESP/GRE.
L Enter the forwarding port number when you select the
protocol from TCP/UDP/TCP&UDP.
L If you want to set one port, enter its port number only.
L If you want to set a range of ports, enter the port numbers in
the following way: "2000 – 3000"
Helpline Tel. No.: U.K. 0844 844 3898