Table of Contents
Advertisement
L This feature is not available in AP (Bridge) mode.
DMZ:
This feature allows you to configure the DMZ (DeMilitarised Zone) settings. Enable DMZ
to expose a specified computer on your LAN to the Internet.
Important:
L A computer specified as the DMZ host may be vulnerable to security risks.
1
Click [Advanced Setup] on the Top Menu.
2
Click the [Advanced] tab, then click [DMZ].
3
Configure the settings, then click [Save].
Setting
[DMZ]
[DMZ Host IP
Address]
4
Click [Restart].
L The base unit automatically restarts and the Top Menu is displayed.
Note:
L This feature is not available in AP (Bridge) mode.
Description
L Select whether to enable or disable the DMZ feature.
L Enter the IP address of the computer to be exposed to the
Internet.
Helpline Tel. No.: U.K. 0844 844 3898
Base Unit Settings
161
Advertisement
Table of Contents
Troubleshooting
