Panasonic KW-WP1050E Operating Instructions Manual page 168

Base Unit Settings
Setting
[Destination Port]
[Protocol]
[Log Output]
*1 When direction is WiL, Source IP 'local' is Invalid. When direction is LiW,
Destination IP 'local' is invalid.
5
Click [Restart].
L The base unit automatically restarts and the Top Menu is displayed.
Important:
L The packet filtering is NOT executed for the DMZ host.
Note:
L To edit the setting:
1
Click the desired entry number in step 3.
2
Edit the items in the Packet Filtering Setting page.
3
Click [Save].
4
Click [Restart].
L To delete the setting:
1
Click the desired entry number in step 3.
2
Click [Delete] in the Packet Filtering Setting page.
3
Click [OK] in the confirmation dialogue box.
4
Click [Restart].
L As the default security policy, outgoing packets initiated from the computer on your LAN
to the Internet are allowed, but other packets are denied.
L Security functions are executed in the following order:
– Easy security (Attack detection)
– Packet filtering
– Easy security (except for Attack detection)
L This feature is not available in AP (Bridge) mode.
168
Description
L Enter the packet destination IP address/netmask to be
filtered.
L The entry is the same as the Source Port.
L Select the protocol to be used from TCP/UDP/TCP&UDP/
ESP/GRE/ICMP. If you want to set all protocols, select "*".
L Set whether to display the temporarily saved packet
information on the "Packet Filtering Log:" (page 193).
Helpline Tel. No.: U.K. 0844 844 3898