Panasonic KW-WP1050E Operating Instructions Manual page 37

4
Connect a separate Ethernet cable to the "LAN" port on the base unit and the Ethernet
(LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged
the router from in step 2).
L You can also connect your computer to the base unit via wireless LAN connection.
5
Connect the included AC adaptor cord to the power port on the base unit and an AC
outlet.
L When the base unit turns on (The WAN indicator lights in green or amber), the
installation is complete.
Router mode - With a MODEM only
If you install the base unit with a modem only, the base unit should be set to Router mode.
In Router mode, the base unit assigns IP addresses to network devices (including wireless
devices) as a DHCP server. It also protects the network devices from being directly
exposed to the WAN. For your connection mode, select [DHCP], [Static] or [PPPoE] in
Initialization Setup (page 39).
AC mains lead
To AC outlet
Mode selector
Base unit
6
AC adaptor
Helpline Tel. No.: U.K. 0844 844 3898
1
4
To LAN port
Ethernet cable
(not included)
3
To WAN port
Ethernet cable
(included)
Getting Started
WAN indicator
Computer
(if necessary)
2
Internet
2, 5
Cable or DSL modem
37