Panasonic KW-WP1050E Operating Instructions Manual page 172

Base Unit Settings
3
Configure the settings, then click [Save].
Setting
[Mode]
[Channel]
[Network Name
(SSID)]
[SSID Broadcast]
4
Click [Restart].
L The base unit automatically restarts and the Top Menu is displayed.
Note:
L You need to register the handset to the base unit again when you change the network
name (SSID). See "Registering the handset" on page 136.
172
Description
L Select your wireless network mode from the pull-down menu.
L If you have both 802.11b and 802.11g wireless devices in
your network, select [802.11b/g].
L If you have only 802.11b wireless devices, select [802.11b]
L Select [Auto] or the desired channel from 1 to 11.
L Enter your wireless network name (SSID) (1 – 32
alphanumeric characters) in this data field.
L Enable or disable the setting to broadcast your SSID.
L If you select [Disable], only wireless devices that know the
SSID of the base unit can connect to the base unit.
L If you select [Enable], any wireless device can detect the
SSID of the base unit.
Helpline Tel. No.: U.K. 0844 844 3898