Table of Contents
Advertisement
Base Unit Settings
3
Configure the setting, then click [Save].
Setting
[MAC Address
Filtering]
4
Click [Restart].
L The base unit automatically restarts and the Top Menu is displayed.
To configure MAC address filtering entry:
1
Click [Advanced Setup] on the Top Menu.
2
Click the [Wireless] tab, and then click [MAC Address Filtering].
3
To add a new entry, click [Add] under the MAC Address Filtering Table heading.
L MAC Address Filtering Setting page is displayed.
176
Description
L Select whether to enable or disable the MAC address filtering
feature.
L If the MAC address filtering is enabled, only the wireless
device with the registered MAC address can send/receive
data.
Helpline Tel. No.: U.K. 0844 844 3898
Advertisement
Table of Contents
Troubleshooting
