Panasonic KW-WP1050E Operating Instructions Manual page 170

Base Unit Settings
4
Configure the settings under the Routing Setting heading, then click [Add] to add a new
entry.
Setting
[Status]
[Destination
Network/Mask]
[Gateway]
5
Click [Restart].
L The base unit automatically restarts and the Top Menu is displayed.
Note:
L To edit the setting:
1
Click the desired entry number in step 3.
2
Edit the items in the Routing Setting page.
3
Click [Save].
4
Click [Restart].
L To delete the setting:
1
Click the desired entry number in step 3.
2
Click [Delete] in the Routing Setting page.
3
Click [OK] in the confirmation dialogue box.
4
Click [Restart].
L This feature is not available in AP (Bridge) mode.
170
Description
L Select whether to enable or disable the routing setting.
L Enter the network address/netmask for the destination IP
address.
L If you want to set one IP address, enter that IP address in IP
address field and "32" in netmask field. (e.g. If you want to
control the packet from 192.168.1.1, enter "192.168.1.1" in IP
address field and "32" in netmask field.)
L If you want to set a range of IP addresses, enter that network
address in IP address field and it's netmask in netmask field.
(e.g. If you want to control the packet from 192.168.1.0 -
192.168.1.255, enter "192.168.1.0" in IP address field and
"24" in netmask field.)
L Enter the gateway IP address.
Helpline Tel. No.: U.K. 0844 844 3898