TV-IP310PI User's Guide
Setup Your Camera with CD
1� Insert the Installation CD-ROM into your computer's CD-ROM drive
to initiate the Auto-Run program. Choose your preferred language
and then click the Install Camera�
2� Write down the MAC Address of the camera�
© Copyright 2014 TRENDnet. All rights reserved.
3� Connect a PoE capable network cable to the camera's network port
and then to a PoE switch and wait for the camera to boot up. Click
Next when you are done�
* A power adapter (sold separately) can be used instead of PoE switch.
4� Wait while the utility is searches for the camera.
Installation
6