Table of Contents
Advertisement
TRENDnet User's Guide
Video Tamper
This is to detect if the camera has been tampered with and surveillance is
compromised. You can set up tamper proof notifications to alert the system
manager to check the camera.
© Copyright 2017 TRENDnet. All Rights Reserved.
Enable
Check this box to enable tamper detection. Click Save
Tamper
to save the settings.
Detection:
Draw Area: Click Draw Area button to start drawing. Click and drag
on the area you want to set up the tamper detection.
You can setup only one area for tamper detection.
Click Stop Drawing to stop drawing motion detection
areas. The gray block represents the detection area.
Sensitivity: Move the slider to adjust detection sensitivity.
Clear All: Click this button to clear all the set up areas.
TV‐IP312PI
45
Advertisement
Table of Contents
