Time Group Service-Time Service; Time Service-Time Group (1-8)-Day Service - Panasonic KX-TVP200 Installation Manual

B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS
In Manual Modes (Day, Night, Lunch, or Break), services have this order of priority:
Caller ID Call Routing > Trunk Service > Port Service
(Holiday Service is disregarded.)

Time Group Service-Time Service

Time Service is a timer function that selects the desired call handling method based upon time
of day; Day, Night, Lunch and Break Services are available.
Night Service can be assigned within Day Service parameters; Night Service starts when Day
Service ends, and ends when Day Service starts. There are 3 periods for Break Service: Break
1 Service, Break 2 Service and Break 3 Service.
You can have different Time Service settings for each Time Group 1-8.
In each Time Service period, the parameters for Port Service, Trunk Group Service and
Operator's Parameters can be specified differently.
Note
Break Service and Lunch Service are only available when they are in Day Service
period. If Break 3 Service is out of Day Service period, for example, Break 3 Service
does not work.
To access the proper menu for Time Group Service-Time Service for the selected
time group, follow the menu path as shown:
System Administration Top Menu-1-5-2-2-Time Group No.(1-8)

Time Service-Time Group (1-8)-Day Service

To access the proper menu for Day Service for the selected time group, follow the
menu path as shown:
System Administration Top Menu-1-5-2-2-Time Group No.(1-8)-1
Table B-21
Parameter
Mon
(Start/End)
|
Sun
(Start/End)
246 Installation Manual
Value Range
(Default)
1-12: h Specifies the "Start" and "End" times of the Day Service.
00-59: min
Day Mode: Day Mode in effect around the clock (24 h)
AM/PM: a.m./p.m.
Night Mode: Night Mode in effect around the clock (24 h)
D: Day Mode
N: Night Mode
(9:00 AM-5:00 PM)
Description/Function