Kx-Td500 Programming For Inband Integration - Panasonic KX-TVP200 Installation Manual

Voice processing system
Hide thumbs Also See for KX-TVP200:
Table of Contents

Advertisement

a)
If the VPS is answering all incoming calls:
b)
If the VPS is only answering calls not answered by the operator (Operator Backup):
c)
If the VPS is only answering calls not answered by user extensions:
KX-TA series

3.3.3 KX-TD500 Programming for Inband Integration

Whenever possible, we recommend that you use DPT Integration. However, in some cases,
this is not possible. In the following situations, you need to use Inband Integration:
Your PBX is a third-party telephone system.
You have a KX-TD500, but all the extension cards are analogue types.
You have a KX-TD500, but the DHLC/DLC cards are ancient versions (therefore, cannot
support DPT Integration).
Note
The KX-TD500 is not sold in the United Kingdom. It is only available in some
countries.
1.
Assignment of the extension card to be connected to the VPS
3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs
Outside (CO) Line Mode—Use System Programmes [414] (Day Mode), [415]
(Night Mode), [416] (Lunch Mode) to set this parameter. Program all lines DIL to the
first extension of the Voice Mail hunt group. The KX-TA series will allow incoming
outside calls to hunt only if the outside (CO) lines are DIL to the first port of the hunt
group. Lines programmed as "Normal" do not hunt.
Flexible Ringing Assignment—For each outside (CO) line, use System
Programmes [408] (Day Mode), [409] (Night Mode) and [410] (Lunch Mode) to
enable ringing at the operator's extension (jack).
Delayed Ringing Assignment—To give the operator time to answer the call before
the VPS picks up, we recommend setting the delay to a few seconds for each
extension connected to the VPS. Use System Programmes [411] (Day Mode), [412]
(Night Mode) and [413] (Lunch Mode).
Outside (CO) Line Mode—Set the mode for each outside (CO) line to "Normal".
Use System Programmes [414] (Day Mode), [415] (Night Mode) and [416] (Lunch
Mode) to set this parameter.
Flexible Ringing Assignment—For each outside (CO) line, use System
Programmes [408] (Day Mode), [409] (Night Mode) and [410] (Lunch Mode) to
enable ringing on every extension (jack) that you want to have ring.
Delayed Ringing Assignment—To give users time to answer the call before the
VPS picks up, we recommend setting the delay to a few seconds for each extension
connected to the VPS. Use System Programmes [411] (Day Mode), [412] (Night
Mode) and [413] (Lunch Mode).
Outside (CO) Line Mode—Set the mode for each outside (CO) line to "Normal".
Use System Programmes [414] (Day Mode), [415] (Night Mode) and [416] (Lunch
Mode) to set this parameter.
Extension 106
6
7
8
Mailbox for Extension 106
VPS
Port 1
Extension 207
Port 2
Extension 208
Installation Manual
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents