Common Dpt Integration Features And Setup Procedures; Live Call Screening (Lcs) Programming; Live Call Screening Password Assignment; Live Call Screening Password Cancelling - Panasonic KX-TVP200 Installation Manual

4.4 COMMON DPT INTEGRATION FEATURES AND SETUP PROCEDURES

4.4 COMMON DPT INTEGRATION FEATURES
AND SETUP PROCEDURES
The following features can be used on any KX-T proprietary telephone (7000/7300 series
analogue; 7200/7400/7500 series digital).

4.4.1 Live Call Screening (LCS) Programming

LCS notifies subscribers of incoming messages to their mailboxes. The notification method is
programmable for hands-free or private. Hands-free allows the user to monitor a recording
through the speakerphone and, if desired, intercept the call by lifting the handset. The private
mode notifies the user with an alert tone when a message is being recorded. By pressing the
LCS button, the user can monitor the message and intercept the call by going off-hook. System
Programming or PC Programming also determines whether the mailbox continues to record
after the user intercepts the call.

4.4.2 Live Call Screening Password Assignment

To allow the Live Call Screening feature to work at an extension, the extension must have the
LCS button lit. To light this button on the telephone, press the LCS button, then enter the
password. This password prevents others from activating the LCS feature and listening to the
messages as they are being left. (It is not necessary to enter PITS Programming to activate
this feature.)
PC programming is also possible.
1.
Lift the handset or Press the SP-PHONE button.
2.
Dial the feature number [799].
3.
Enter a 3-digit password ([000]-[999]) twice.
You will hear a confirmation tone, then a dial tone.
Screen output: The 3-digit password you entered is displayed.
4.
Hang up or Press the SP-PHONE button.
5.
Repeat these steps for each telephone.

4.4.3 Live Call Screening Password Cancelling

To cancel the password, follow the procedure below. (It is not necessary to enter PITS
Programming to activate this feature).
PC programming is also possible.
1.
Lift the handset or Press the SP-PHONE button.
2.
Dial the feature number [799].
3.
Enter the password ([000]-[999]).
You will hear a confirmation tone, then a dial tone.
Screen output: Password Cancel
4.
Hang up or Press the SP-PHONE button.
96 Installation Manual