Panasonic KX-TVP200 Installation Manual page 213

Table B-5
Parameter
Use Mode
No. of Retries
Busy Delay
Time
No Answer
Delay Time
Time Frame 1,
2
MON:
TUE:
WED:
THU:
FRI:
SAT:
SUN:
Remote Call Forward to CO
Follow the procedure below to specify the destination outside telephone number(s) to which
the callers are forwarded when the Remote Call Forwarding feature is set to an outside (CO)
line.
Telephone number 1 and Telephone number 2 can be specified per mailbox.
• Class of Service programming determines if the mailbox owner is able to use this
feature.
• This feature is only available with DPT Integration.
Value Range
(Default)
1. Not Use Specifies how Device 1, 2, or 3 is to be used. The
2. Continuously subscriber can also specify the use mode from his
3. Scheduled telephone.
(Continuously)
1. Not Use—Device 1, 2, or 3 is not used for a
2. Continuously—Device 1, 2, or 3 is called whenever
3. Scheduled—Device 1, 2, or 3 is called on a schedule
0-4 times Specifies the number of times that a notification call to
(0) Device 1, 2, or 3 should be attempted after a busy or no
answer condition is received.
2-120 min Specifies the time (in minutes) the VPS must wait after
(3) a busy condition is received before making another
notification call to Device 1, 2, or 3.
2-120 min Specifies the time (in minutes) the VPS must wait after
(30) a no-answer condition is received before making
another notification call to Device 1, 2, or 3.
1-12: h Specifies the daily schedule for Message Waiting
Notification service for all days of the week.
00-59: min
AM/PM:
Note: These parameters are active only when "Use
a.m./p.m.
Mode" is set to "Scheduled".
: All Day
Space: No Use
(No Use)
B2 SYSTEM ADMINISTRATION—MAILBOXES
Description/Function
notification call.
a message is recorded in the mailbox.
basis when a message has been left in the mailbox.
Installation Manual 213