Other Parameters-External Message Delivery - Panasonic KX-TVP200 Installation Manual

B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS
Table B-30
Parameter
System
Callback No.

Other Parameters-External Message Delivery

Controls the handling of External Message Delivery calls.
To access the proper menu for External Message Delivery, follow the menu path as
shown:
System Administration Top Menu-1-5-7-4
Table B-31
Parameter
Retry Times
Busy Delay
No Answer
Delay
Outgoing Call
Ports
Message
Length
Max.
Messages for
Mailboxes
258 Installation Manual
Value Range
(Default)
Up to 32 digits Specifies a telephone number that will display on the
(None) subscriber's beeper (pager) as a callback number. The
callback number entry mode "X" must be included in the
telephone number.
Note: If "Beeper Callback No. Entry Mode" is enabled
through COS, the callback number entered by the caller
will display on the destination beeper (pager). However,
if the caller fails to enter a callback number, the System
Callback No. will display instead.
Value Range
(Default)
0-4 times Specifies the number of times to attempt an external
(3) message delivery call when the destination is busy or if
there is no answer.
2-60 min Specifies the length of time in minutes the VPS must wait
(3) after a busy condition is received before trying to deliver
the message again.
2-120 min Specifies the length of time in minutes the VPS is to wait
(60) after a no answer condition is received before trying to
deliver the message again.
Port No. Specifies the port numbers used for the External Message
(1-12) Delivery feature.
1-6 min Specifies the allowable message length of external
(3) delivery messages that the subscriber can record.
1-100 msgs Specifies the maximum number of external delivery
(3) messages that can be stored in 1 mailbox.
Description/Function
Description/Function