C7 Checking System Usage (System Reports) - Panasonic KX-TVP200 Installation Manual

C7 CHECKING SYSTEM USAGE (SYSTEM
REPORTS)
The System Manager can generate 8 System Reports to help monitor the VPS operating
status. The reports are sent from the RS-232C port to either a printer or a terminal. (The
System Administrator is also able to output System Reports.)
Obtaining System Reports
1.
Log in the Main Menu.
2.
Press [5] for the System Report Menu.
3.
Press [1], [2], [3], [4], [5], [6], [7], or [8] to generate the desired report.
•
•
•
•
•
•
•
•
Note
The Mailbox Parameter Report is displayed as "Mailbox Assignments". The Class
of Service Parameter Report is displayed as "COS Assignments".
4.
For Disk Usage Report, Port Usage Report, Mailbox Usage Report or Fax Call Report,
Press [1]. To generate the Mailbox Usage Report, Go to Step 5.
5.
Mailbox Usage Report—Type the mailbox number of the start of the range.
Note
If a [#] is entered in place of each digit of the mailbox numbers (e.g., # # # for 3-
digit mailbox numbers), reports for all mailboxes will be printed and the System
Report Menu will appear. In this case, Step 6 can be skipped.
6.
Press [1] to specify the mailbox range and Type the mailbox number of the end of the
range, or Press [2] to obtain all mailbox usage counts. This mailbox number is the end of
the mailbox range. The mailbox number entered in Step 5 is the start of the range. For
example, to specify the mailbox range 201 through 309, enter 201 in Step 5 and 309 in Step
6.
Note
While the System Administrator programmes via a personal computer, a System
[1] System Service Report
[2] Disk Usage Report
[3] Port Usage Report
[4] Mailbox Usage Report
[5] Mailbox Parameter Report
[6] Call Account Report
[7] Class of Service Parameter Report
[8] Fax Call Report

C7 CHECKING SYSTEM USAGE (SYSTEM REPORTS)

Installation Manual 289