Panasonic KX-TVP200 Installation Manual page 233

Operator's Parameters-Day Mode-Operator 2
Operator 2 receives operator-seeking calls when Operator 1 is busy or does not answer and
Operator 1's parameters are set as follows:
• Busy Coverage Mode—No Answer Coverage
• No Answer Coverage Mode—Next Operator
To access the proper menu for Operator Parameters-Day Mode-Operator 2, follow
the menu path as shown:
System Administration Top Menu-1-4-1-2-1-2
Table B-13
Parameter
Operator's
Extension
Operator's
Mailbox No.
Busy Coverage
Mode
Value Range
(Default)
1-5 digits Specifies the extension number for Operator 2. Any valid
(None) extension number can be assigned.
2-5 digits Specifies the mailbox number for Operator 2. Callers to
(None) Operator 2 are prompted to leave a message in this
mailbox depending upon how the Busy Coverage or No
Answer Coverage modes are set.
1. Hold Specifies how to handle calls when the Operator 2
2. No Answer extension is busy.
Coverage
3. Call Waiting
1. Hold—Automatically places the caller on hold and the
4. Disconnect
Message
(Hold)
2. No Answer Coverage—Offers the option specified by
3. Call Waiting—Signals Operator 2 when another call
4. Disconnect Message—Disconnects the call after
B5 SYSTEM ADMINISTRATION—SERVICE SETTINGS
Description/Function
Operator 2 extension is called again.
the No Answer Coverage Mode to the caller.
is waiting using the Call Waiting feature of the PBX.
playing "Thank you for calling".
Installation Manual 233