Panasonic KX-TVP200 Installation Manual page 262

B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS
If the main fax extension is not available to receive a fax, the VPS will forward the fax
transmission to the alternate fax extension.
To access the proper menu for Fax Management, follow the menu path as shown:
System Administration Top Menu-1-5-7-8
Table B-35
Parameter
Automatic
Transfer of
Incoming Fax
Call
Main Fax
Extension No.
Alternate Fax
Extension No.
Fax No Answer
Time
Fax Manager
Mailbox No.
Fax No Answer
Coverage Mode
262 Installation Manual
Value Range
(Default)
1: Disable Enables or disables the Automatic Transfer of Incoming
2: Enable Fax Call Service.
(Disable)
Note: Automatic detection works for only the first 30s.
2-5 digits Specifies the main fax extension number.
(None)
2-5 digits Specifies the alternate fax extension number. When the
(None) main fax extension is busy or does not answer within the
specified "Fax No Answer Time", the VPS forwards the
fax call to the alternate fax extension.
5-60 s Specifies the length of time (in seconds) the VPS must
(10) wait before taking other action when there is no answer
at either fax extension.
Note: This timer applies to the fax call that has been
transferred to the main or alternate fax extension.
2-5 digits Specifies the Fax Manager Mailbox Number. The VPS
(None) will notify the fax manager of the status of fax calls
depending upon the settings of the "Fax No Answer
Coverage Mode" and "Fax Notification Mode "
parameters.
1. No If set to "Mbx", the VPS will leave the number of
2. Mbx unanswered fax calls in the Fax Manager's mailbox.
3. Ext
(No)
Example: "The FAX transfer situation is as follows. One
attempt was no answer".
1. If set to "Ext", the VPS will call the Fax Manager's
extension to specify the number of unanswered fax
calls received.
2. If set to "Mbx", the VPS will leave the number of
unanswered fax calls in the Fax Manager's mailbox.
3. If set to "No", the VPS will take no action concerning
unanswered fax calls.
Description/Function