Wiring - Panasonic KX-TVP200 Installation Manual

2.1.2 Wiring

• Do not wire the telephone cable parallel to an AC power source, computer, etc. If cables
are run near those wires, shield them with metal tubing or use shielded cables and earth
the shields.
• Use protectors if running cables on the floor. Avoid running cables under carpets.
• Avoid sharing a 110 V-240 V AC power supply for computers, telexes, and other office
equipment with the VPS. Induction noise from such equipment may interrupt the VPS
operation.
When making any connections or removing the cover, be sure the power switch is
turned off.
When installing telephone wiring, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically designed for
wet locations.
• Never touch uninsulated telephone wires or terminals unless the telephone line has
been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
Note
If you live in an area that can have frequent power failures, we strongly recommend
that you purchase a suitable UPS (uninterruptible power supply) for your VPS (and
PBX if needed). The power rating of your VPS may be found in the specifications.
2.1 SAFETY PRECAUTIONS
Installation Manual 31