Punch-In Recording - Yamaha SY99 Owner's Manual

In punch-in recording the notes you play will be recorded in the exact timing with with you play them, but
only over the measures you specify. This is useful when you wish to re-record only a specific section of a
previously recorded track.
When to use punch-in
recording
Specify the area of
measures to re-record
42

Punch-in recording

Suppose that while recording track 2, you made a few mistakes in measures 15
and 16. While it is possible to re-record the entire track, it is more efficient to
use punch-in recording to re-record only the measures necessary. There is no
point in using punch-in recording on a track which contains no data.
Punch-in recording allows you to specify the measure at which recording will
begin and the measure at which recording will end. Measures before and after
this area will not be affected.
The following diagram shows the result of punch-in recording.
In this example we will assume that you wish to re-record measures 15 and 16
of track 2.
1. Press SONG to enter song play mode.
2. Press RECORD to enter song record mode.
3. Press F3 (Pnch) to select punch-in recording.
4. Press the program select button 2 to select track 2 for recording.
5. Specify "From Meas =015" and "To Meas =016".