Song Edit Jobs 2 - Yamaha SY99 Owner's Manual

SONG MODE
Summary: The second song edit job directory con -
tains various operations which allow you to edit
the data in specified measures of tracks 1-15 in
various ways. To select the track to which the
operation will apply, press a track select button
1-15. Some operations (jobs 10, 12, 13, and 15)
allow you to select two or more tracks. These
edit jobs can be used only on tracks 1-15. Track
16 contains Part data, not sequence data.
Procedure:
From: song play mode
Press: F4 (Job2)
Select: the desired song edit job
Move the cursor in this area and press ENTER to
select the specified job.
Pressing F1-F8 will select the corresponding job
1-8. Holding SHIFT and pressing F1-F7 will select
the corresponding job 9-15.
01: Quantiz (Quantize): Adjust the timing of
each event in the specified measures of the
selected track to the nearest interval of the
specified value.
02: MdfGate (Modify gate time): Modify the
gate times (durations) of all notes in
specified measures of the selected track.
03: MdfyVel (Modify velocity): Modify the note-
on velocity values for all note events in
specified measures of the selected track.
04: Cresc (Crescendo): Create a gradual change
in note-on velocity over the specified mea-
sures of the selected track to create an effect
of crescendo or diminuendo.
218

Song edit jobs 2

(JUMP #606)
05: Transps (Transpose): Transpose all notes in
specified measures of the selected track by a
specified interval.
06: ThinOut (Thin out): Conserve sequencer
memory by deleting approximately every
other occurrence of a specified type of con-
tinuous controller from specified measures of
the selected track.
07: ErsEvnt (Erase event): Erase all data of a
specified type from specified measures of the
selected track.
08: NtShift (Note shift): Shift all notes of a
specified note number in the selected track
to another note number.
09: MovCIck (Move clock): Move events in the
specified measures of the selected track
forwards or backward in time.
10: CpyMeas (Copy measure): Copy a specified
range of measures in the selected track(s)
to another location in the same track.
11: ErsMeas (Erase measure): Erase all data
from specified measures of the track, leaving
the measures empty.
12: DelMeas (Delete measure): Delete the
specified measures from the selected
track(s), and move the following measures
up to fill the gap.
13: CreMeas (Create measure): Insert empty
measures of the specified time signature into
the selected track(s) over the specified
range of measures.
14: MixTrck (Mix track): Combine the data of
specified measures from a specified track
with the data of another track.
15: ErsTrck (Erase track): Erase all data from
the selected track(s).
JUMP #606