Song Setup Jobs - Yamaha SY99 Owner's Manual

SONG MODE
Summary: Song setup parameters affect the overall
functioning of the sequencer.
Procedure:
From: song play mode or song record mode
Press: F5 (Stup)
Select: the desired song setup job.
SONG SETUP
Move the cursor in this area and press ENTER to
select the specified job.

SONG SETUP JOBS

Summary: You can specify that unwanted types of
data not be recorded, so as to conserve
sequencer memory.
Procedure:
From: song setup job directory
Select: 01:Receive Event
Specify: reception on/off for each type of data.
To exit: to the song setup job directory press
EXIT.
Velocity (on, off): Specify whether the velocity
value of note-on messages will be recorded by
the sequencer. When this is set "off, all notes
will be recorded with a velocity of 64 regardless
of their original velocity.
Control Change (on, off): Specify whether or not
control change messages will be recorded by the
sequencer.
228
Song setup jobs
(JUMP #622)
1. Receive event
(JUMP #622)
(JUMP #623)
Remarks: In order to conserve sequencer memory,
Pressing F1-F4 will select the corresponding job
1-4.
01: Receive Event: To conserve sequencer
memory, you can specify that unwanted
types of data not be recorded.
02: MIDI Control: Specify whether the SY99's
sequencer will be controlled by its own tim-
ing source or by an external sequencer.
03: Accent Level: Specify the accent level for
each of the four function keys F1-F4 used to
specify the accent of a note in song step
record mode.
04: Clock/Beat: Set the number of clocks per
beat that will be displayed in editing.
Pitch Bend (on, off): Specify whether or not pitch
bend messages will be recorded by the
sequencer.
Program Change (on, off): Specify whether or not
program change messages will be recorded by
the sequencer.
After Touch (on, off): Specify whether or not
after touch messages will be recorded by the
sequencer.
System Exclusive (on, off): Specify whether or
not system exclusive messages will be recorded
by the sequencer. The SY99 sequencer can not
record system exclusive messages which are
longer than 32 bytes.
turn off reception for types of data that do not
affect the voices you are using. For example if
the voices have not been programmed with
aftertouch sensitivity, turn aftertouch reception
off so that the sequencer memory does not fill up
with unnecessary data.
JUMP #622
JUMP #623