Table of Contents
Advertisement
3.6
The touch panel display will be as follows during printing or transmission.
When Exit is selected on the screen displayed, the next copying/scanning operation can be
programmed ahead without disrupting the current printing operations.
3
The following table explains about the relationship between the printing function and the copying/
scanning function.
Control Panel Operations
Defining the copy/scan settings
Select Exit during printing
Press Interrupt during printing
* : This time setting is done from the Tools Mode screen. See "Chapter 13 Configuring by the Tools
38
Printing vs Copying/
Scanning
Mode Screen" for details on the setting method.
Printer Actions
Cannot print but can receive printing instructions from
computers.
After a certain time has passed after the settings, the
document sent by the computer will be printed.
During copying/scanning, printing cannot be done. After
these jobs are completed, documents sent by the computer
will be printed in the order received.
Copying/scanning operations can be programmed ahead
without disrupting the current printing operation.
Printing will be stopped temporarily and the copy/scan
functions can be used. However, printing instructions can be
received from the computers. When Interrupt is pressed again
to exit the interrupt mode, printing will restart. Even during the
interrupt mode, the print processing will start if no operations
are carried out after a certain time*. Documents sent by the
computer will be printed according to the order received.
Advertisement
Table of Contents
