Configuring Printer; Activating Internet Service - Panasonic DA-PC700 Operating Instructions Manual

10.3
This section describes the configurations to be done at the printer.
10.3.1

Activating Internet Service

Activate Internet Service on the touch panel display by the following procedure.
Procedure
Press the Settings/Meter Check button on the control panel and select Tools
Mode on the screen displayed.
Enter the access number of the system administrator by using the numeric
keypad and touch Confirm.
The factory setting of the access number is "11111".
Select Print/Scan Mode Settings.
144

Configuring Printer

If the IP address has not been defined, follow the message displayed to define it after
the Internet Service is activated.