Table of Contents
Advertisement
6.2.2
Other Settings
If necessary, set the following settings on the printer. However, the factory setting of
these items do not need to be changed for normal use.
• Print Mode
• PJL Switch
• LPD Spool
"Chapter 13 Configuring by the Tools Mode Screen" for details on the printer setting
items.
(Factory setting: PCL*)
(Factory setting: On)
(Factory setting: Hard Disk spool)
* If the optional PostScript software kit is installed, factory setting will be Auto.
6.2 Setup for the Printer
99
6
Advertisement
Table of Contents
