Table of Contents
Advertisement
3.1
3.1.1
Activate application software used by the host
device
3
Specify printing from application software
If necessary
If necessary
30
Flow of Printing
For Windows
The basic flow of printing from a Windows environment after installing the printer
driver is as follows:
(This may differ according to the host computer and system configuration used.)
Refer to the manual of the application regarding its operation.
If necessary
Operate menu
Before sending print data from the client computer, check the following:
(1) Port status in Tools Mode>Printer/Scan Mode Settings>Port Settings
(the enabled port is highlighted)
(2) Print mode of the port in Port Settings>(selected port)>Print Mode
Refer to the manual of the application regarding its operation.
Stop printing
End
"Chapter 13 Configuring by the Tools Mode Screen"
"3.3 Cancelling Printing From Printer"
Output
"3.4 Forced Outputting"
Advertisement
Table of Contents
