Table of Contents
Advertisement
Cause
The spool setting is not
correct.
Status Display
-
(The print processing cannot be completed and nothing will
be printed)
Verification
From the window of the printer, select Properties
from the "Printer" menu. On the "Details" tab, check
that FX TCP/IP DPU Port is displayed at Print to
the following port. Click Spool Settings to display its
dialog box. Check if the "Print directly to the printer"
radio button is selected.
Action
Change the spool setting by selecting any other radio
button other than Print directly to the printer.
15.3 Using the Direct Print Utility
Treatment
15
217
Advertisement
Table of Contents
