Panasonic DA-PC700 Operating Instructions Manual page 128

7.4 Changing Printer and Workgroup Name
Item
Maximum Sessions
Unicode Support
DHCP
WINS DHCP Resolve Activation of WINS DHCP Resolve. On/Off
IP Address
Subnet Mask
Gateway Address
WINS Primary Server Set the WINS primary server
Address
WINS Secondary
Server Address
Administrator Name
Administrator
Password
Location
Reboot
114
Remarks
Maximum connections of printer.
Set whether to use unicode or
local code (Shift JIS).
Activation of DHCP.
Set the IP address.
Set the subnet mask.
Set the gateway address.
address
Set the WINS secondary server
address.
Administrator name.
Password of administrator.
Current setting not displayed.
Comments on location of machine. Maximum
Printer will be rebooted after the
editing of the config.txt parameter
setting file if set to On.
Usually set to Off when activated.
Machine will not be rebooted even
if it is set to On if there is an error
in the setting.
Value Factory Setting
3 - 10 5
Enable/Disable Disable
On/Off On
On
----- 0.0.0.0
----- 0.0.0.0
----- 0.0.0.0
----- 0.0.0.0
----- 0.0.0.0
Maximum ADMIN
20 bytes
Maximum admin
14 bytes.
-----
48 bytes.
On/Off Off