Wlan Security Dot1X Password (Client) - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Security and authentication
10.2 WLAN
10.2.5.8
wlan security dot1x password (client)
Description
With this command, you specify the password for the RADIUS server.
When assigning the password, ASCII code 0x20 to 0x7e is used.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan security dot1x password <string>
The parameter has the following meaning:
Parameters
string
Result
The password is specified.
Further notes
You display the settings with the
382
Description
New password
show wlan security <wlan 0/X>
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Values or range of values
Enter the password for the user name. You specify
the user name with the
wlan security dot1x
command
username
command.
Configuration Manual, 11/2014, C79000-G8976-C351-03
Advertisement
Table of Contents
